Solution 4: Checking for missing JumpersĪnother reason why your computer refuses to boot and logs the error message is because of a missing jumper. A little research on your BIOS version should make it clear to you whether upgrading your current BIOS will fix the problem. Upgrading the BIOS should be kept as a last resort and should only be performed by people who know what they are doing. Note: Please upgrade the BIOS at your own risk. You can read our articles on how to update the BIOS of an HP Desktop/Laptop, a Gateway Desktop/Laptop, a Lenovo machine, an MSI motherboard and of a Dell Desktop/Laptop. There was positive feedback from the users that updating their BIOS resolved the error message “USB Device over current status detected”. In modern computer systems, BIOS is stored in flash memory so it can be rewritten without the menace of replacing the hardware. Traditionally, BIOS was written on ROM and hardware needed to be replaced when updating the BIOS. Most of the BIOS are designed specifically to work with a specific model or motherboard. The BIOS is also responsible to test hardware components on your PC and make sure that they are working properly without any errors. It is more like a key which starts all other processes on your computer. The BIOS system is preinstalled on your computer by your manufacturer and it is the first software that runs when your computer is started up. Solution 3: Updating your BIOS (Advanced Users only)īIOS stands for Basic Input/Output System and it is a firmware used to perform the hardware initialization during the booting process of your computer. Either you can replace it or get it checked by a technician. If it doesn’t, it means the USB socket was problematic. Now turn on your computer and see if the error message persists.Once you have located the pins and socket, unplug the connector.These USB connectors will most probably be for the front of the PC since the connections for the back of the PC are directly connected to the motherboard and you cannot do anything about them. Once you see the motherboard, search for USB connectors.Open your computer’s case from the side by unscrewing the nuts and bolts. Also, unplug the power cable from the socket. Damaged USB ports will indeed be responsible for the overflow and cause your computer to shut down. It is possible that the USB connectors present in your tower are not properly connected to the connecting pins or the USB ports are somewhat damaged. The next thing you should check is the USB connections present inside your tower/PC. If you cannot diagnose which device might be causing the error message, it usually means that there isn’t any problem with the USB devices. Solution 2: Checking Front USB Ports Connected You can either check the device yourself or take it to the technician to fix it. Along the way, you will come across a troublesome device which will be causing the error message.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |